Explore Our Product Range
QC FiberLine 150
FiberLine 150 adds higher power with dual-zone extraction and adaptive piercing for thick stainless and alloy work. Shuttle tables minimize idle time between sheets.Designed for production cells requiring consistent edge quality and low maintenance.
- Working area
- 2000x4000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 89 kg
- Laser power
- 15 kW
- Laser type
- CO2
- Max cut thickness
- 40 mm
QC Precision 18
Precision 18 targets fine-feature work with a narrow spot and low-kerf cuts. Closed-loop motion keeps micro details crisp on thin metals and composites.Great for jewelry, instruments, and custom signage.
- Working area
- 400x650
- Power requirement
- 230V / 50Hz / Single-Phase
- Weight
- 19.2 kg
- Laser power
- 1.8 kW
- Laser type
- Neodymium
- Max cut thickness
- 3.5 mm
QC MaxCut 260
MaxCut 260 pairs high-power fiber delivery with automated bevel cutting. Capacitive sensing and nozzle cleaning keep uptime high on thick plate.Engineered for heavy equipment and bridge fabrication workflows.
- Working area
- 3000x8000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 400 kg
- Laser power
- 26 kW
- Laser type
- CO2
- Max cut thickness
- 70 mm
QC Compact 20
Compact 20 fits R&D labs and kiosks, combining low noise with fast lens swaps. Excellent for acrylic, signage laminates, and light metal protos.Material presets reduce setup time for short runs.
- Working area
- 500x700
- Power requirement
- 230V / 50Hz / Single-Phase
- Weight
- 11 kg
- Laser power
- 1.2 kW
- Laser type
- CO2
- Max cut thickness
- 10 mm
QC RailCut 240
RailCut 240 is built for oversized plate with synchronized dual drives and active torch height control. Reinforced frame resists racking over long beds.Ideal for shipyards and structural steel shops needing deep, repeatable cuts.
- Working area
- 2500x8000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 1680 kg
- Laser power
- 24 kW
- Laser type
- CO2
- Max cut thickness
- 65 mm
QC FiberLine 120
FiberLine 120 uses a high-power fiber source for fast stainless throughput. Automated nozzle centering and sealed optics reduce maintenance in 24/7 cells.Shuttle tables keep cycle times tight for contract fabrication lines.
- Working area
- 1500x3000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 36 kg
- Laser power
- 12 kW
- Laser type
- CO2
- Max cut thickness
- 25 mm
QC EdgeCut 75
EdgeCut 75 adds higher wattage for heavy sheet metals with twin vacuum zones for stable fixturing. Auto-focus and pierce optimization keep edges clean at speed.Great for job shops needing quick changeovers between mild steel and aluminum.
- Working area
- 1500x3000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 32 kg
- Laser power
- 3.5 kW
- Laser type
- CO2
- Max cut thickness
- 45 mm
QC MaxCut 220
The QC MaxCut 220 is built for thick plate fabrication with high-power fiber delivery and reinforced rails. Automatic nozzle cleaning and capacitive sensing keep uptime high.Designed for shipbuilding, structural steel, and heavy equipment shops needing repeatable, deep cuts.
- Working area
- 2500x6000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 280 kg
- Laser power
- 22 kW
- Laser type
- CO2
- Max cut thickness
- 30 mm
QC Precision 12
The QC Precision 12 targets jewelry, signage, and micro-fab use cases. A fine spot size and closed-loop motion deliver crisp micro-cuts on thin metals and laminates.Pre-configured material profiles shorten setup time for short-run premium work.
- Working area
- 300x500
- Power requirement
- 230V / 50Hz / Single-Phase
- Weight
- 17.8 kg
- Laser power
- 0.12 kW
- Laser type
- Neodymium
- Max cut thickness
- 3.5 mm
QC FiberLine 90
The QC FiberLine 90 uses a fiber source for faster cuts on stainless and aluminum, with low maintenance optics and sealed beam delivery.Its auto table shuttle reduces idle time between sheets, keeping cycle times predictable for contract manufacturers.
- Working area
- 1000x2000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 24 kg
- Laser power
- 9 kW
- Laser type
- CO2
- Max cut thickness
- 10 mm
QC RailCut 180
The QC RailCut 180 features an extended bed for oversize plate work with synchronized dual drives to prevent racking. Integrated height sensing keeps cuts stable over uneven material.Engineered for continuous shifts, it pairs high-power lasers with an active cooling circuit for long duty cycles.
- Working area
- 2000x4000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 1200 kg
- Laser power
- 18 kW
- Laser type
- CO2
- Max cut thickness
- 50 mm
QC Compact 15
The QC Compact 15 is a benchtop laser cutter tuned for prototyping labs and light production. Quiet operation, small footprint, and quick-change lenses make it easy to deploy in tight spaces.Ideal for acrylics, thin metals, and composites where precision and minimal kerf are critical.
- Working area
- 400x600
- Power requirement
- 230V / 50Hz / Single-Phase
- Weight
- 9.5 kg
- Laser power
- 0.75 kW
- Laser type
- CO2
- Max cut thickness
- 6 mm
QC EdgeCut 45
The QC EdgeCut 45 delivers mid-size precision cutting with a reinforced gantry for tighter tolerances. Optimized airflow and enclosed optics improve consistency across metals, composites, and hardwoods.With rapid axis acceleration and automated nesting support, the EdgeCut 45 keeps throughput high while minimizing scrap for busy fabrication teams.
- Working area
- 800x1200
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 22 kg
- Laser power
- 2.5 kW
- Laser type
- CO2
- Max cut thickness
- 30 mm
QC EdgeCut 30
The QC EdgeCut 30 laser cutter stands as a pinnacle of precision and efficiency in industrial manufacturing. Engineered for high-performance cutting of various materials, it is equipped with advanced laser technology that enables intricate designs and seamless cuts. With its remarkable cutting speed and accuracy, the EdgeCut significantly enhances productivity, making it an invaluable asset for manufacturers aiming to optimize their operations.This state-of-the-art machine features a user-friendly interface, allowing operators to easily program and control cutting parameters. Its robust construction ensures longevity, while the integration of sophisticated cooling systems prevents overheating, thereby maintaining consistent performance during prolonged use. Furthermore, the Edgecut's compatibility with automated workflows allows for seamless integration into existing production lines, boosting overall manufacturing efficiency.The QC EdgeCut 30 is ideal for a wide range of applications, including metal, wood, and composite materials, catering to the diverse needs of industrial manufacturers. In a competitive market, investing in the QC EdgeCut 60 laser cutter positions businesses to deliver high-quality products with reduced lead times, ultimately enhancing their competitive edge.
- Working area
- 500x1000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 15 kg
- Laser power
- 2 kW
- Laser type
- CO2
- Max cut thickness
- 15 mm
QC 2500 Plasma
The QC 2500 Plasma laser cutter stands as a pinnacle of precision and efficiency in industrial manufacturing. Engineered for high-performance cutting of various materials, it is equipped with advanced laser technology that enables intricate designs and seamless cuts. With its remarkable cutting speed and accuracy, the QC 2500 Plasma significantly enhances productivity, making it an invaluable asset for manufacturers aiming to optimize their operations.This state-of-the-art machine features a user-friendly interface, allowing operators to easily program and control cutting parameters. Its robust construction ensures longevity, while the integration of sophisticated cooling systems prevents overheating, thereby maintaining consistent performance during prolonged use. Furthermore, the QC 2500 Plasma's compatibility with automated workflows allows for seamless integration into existing production lines, boosting overall manufacturing efficiency.The QC 2500 Plasma is ideal for a wide range of applications, including metal, wood, and composite materials, catering to the diverse needs of industrial manufacturers. In a competitive market, investing in the QC 2500 Plasma laser cutter positions businesses to deliver high-quality products with reduced lead times, ultimately enhancing their competitive edge.
- Working area
- 2500x6000
- Power requirement
- 400V / 50Hz / 3-Phase
- Weight
- 2500 kg
- Laser power
- 25 kW
- Laser type
- Plasma
- Max cut thickness
- 35 mm